Pedestrian Access Control Flap Gate
Pedestrian access control single core flap gate Model No:SZAT-Y2600 Power voltage:AC220V±10% 50HZ Input signal:12v DC level or 12v pulse>100ms Length of arm:260mm Structure :Frame or 304 stainless steel cover Width of passage:≤600mm Product size:1200(L)*300(W)*980(H)mm
Pedestrian access control single core bridge arc edge inclined flap gate
Model No:SZAT-Y2600
Product introduction
Flap gate, one of the channel management equipment, mainly used for pedestrian management; it can quickly open, safe and convenient, is the ideal management of pedestrian high frequency access grooming equipment; has been widely used in airports, subway stations, railway stations, docks, attractions, parks, dormitory units, walkways. With smart card stripping type ticket management system function, the formation of staff and unattended management.
Technical parameter:
Material: |
304 drawing stainless steel |
Cover thickness: |
1.5mm |
Cabinet thickness: |
1.2mm |
External Dimension: |
1200*300*980mm |
Channel width: |
≤600mm |
Production process:
cutting, cutting board, stamping, bending, welding, grinding, assembling, testing, finished products, packing.
Structure
It is composed of the main engine box and the active flap board, which has the advantages of fast running speed and luxurious atmosphere. The shortcoming is that the passageway is narrow and only the pedestrian passes through. Ordinary flank: the frame box, the core, flap arm, the control system, the infrared sensor, the control equipment and so on.
Access control system:
Maintenance of the circuit power of the channel gate:
● cut off the power and clean the dust on the surface. Attention must not be washed with water to prevent short circuiting from occurring.
● refer to the instructions of the brake machine, check whether the parameters of each part are normal, there are no aging electronic components. There is a problem, to contact the manufacturers, follow it, find the root of the problem, the replacement of individual electronic components.
● according to the previous situation, see the circuit part if there is a problem, no problem, then check the circuit, power supply, electric wire, the plug is exposed to or loose, dressing, finishing, tighten the plug, check there is no leakage, if the wire has to be replaced aging.