IC ID Card Control Flap Barrier Gate
Model No:SZAT-Y2380A IC ID card control dual core flap barrier gate Power voltage:AC220V±10% 50HZ Input signal:12v DC level or 12v pulse>100ms Length of arm:260mm Structure :Frame or 304 stainless steel cover Width of passage:≤600mm Product size:1200(L)*300(W)*980(H)mm
IC ID card control dual core bridge inclined flap gate
1.Problem self-recovery and corrective measure ability, convenient maintain and adjust
2.Motherboard with high clean sound read chips which could broadcast in light of user’s requirement
3.Human base model indication function, real time displaying, improve the passing rate and convenient maintain
4.Automatic counting indicating passenger’s number
5.Resetting automatically, auto cancel the pass through and closed barrier in case nothing pass the channel in a setting time
6.Anti pinch function with UPS to satisfy firefighter requires, ensure user’s safe
● It has the function of self inspection and alarm, which is convenient for the user to maintain and use.
● The operating state of the programmable equipment through the built-in small press disk on the main control board;
● The function of sound and light alarm: including illegal entry and tailing alarm;
● Anti flushing function, when the switching signal is not received, the telescopic arm is automatically locked.
● The synchronous function of the telescopic arm;
● When the power is broken, the channel is open automatically and the power is closed automatically.
● Can be connected with a variety of card reading equipment to receive relay switch signal work;
● One way or two way control personnel can get in and out.
Technical parameters :
Power voltage :
Drive voltage :
Input signal :
12v DC level or 12v pulse more than 100ms
Length of the bar:
30 persons per minutes
frame or 304 stainless steel cover
Open direction :
single and double (optional)
Gate opening and closing time:
outdoor and indoor
IP degree :
Width of passage :